dyesubsource
Menu
← Settings finder

Apparel and fabric

Polyester fabric or apparel

Generic / JPPlus guidance

Supplier guidance
Temperature380–400°F193–204°C
Time50 sec–1 min
Pressurelight medium
Verify before production. This result assumes the cited product scope. Test with the actual press, transfer system, blank lot, environment, and production conditions.

Preparation

  1. Lint-roll and pre-press to remove moisture.
  2. Use a foam kit when garment construction causes pressure marks.

Removal and cooling

Paper removal
Lift without shifting the transfer.
Cooling
Cool flat.

Scope and caveats

  • Generic supplier guidance; exact apparel and equipment may require different values.
Sources conflict

Credible guidance differs

DyeSubSource does not average these values. Equipment, coating, blank construction, and supplier workflow can explain the difference.

Polyester fabric: 400–400°F, 35 sec–40 sec →

Evidence

Sources

  1. Johnson Plastics Plus — Sublimation Settings: Time, Temperature, & PressureOfficial source · last checked 2026-08-04