Bags, towels, wallets, and fabric goods
Fabric and fabric-covered sublimation items
Generic / JPPlus guidance
Temperature360–390°F182–199°C
Time45 sec–1 min
Pressuremedium
Verify before production. This result assumes the cited product scope. Test with the actual press, transfer system, blank lot, environment, and production conditions.
Preparation
- Lint-roll the imaging face.
- Use blowout paper and secure the transfer without spraying the product.
Removal and cooling
- Paper removal
- Remove the transfer after pressing.
- Cooling
- Cool flat.
Scope and caveats
- Use the exact product guide when available.
- Fabric construction and foam padding change pressure requirements.
Evidence
Sources
- Johnson Plastics Plus — Sublimating Fabrics and Fabric Covered ItemsOfficial source · last checked 2026-08-04