Ceramic mugs
Ceramic sublimation mug
Generic / Sawgrass guidance
Temperature350–400°F177–204°C
Time2 min 30 sec–3 min 30 sec
Pressuremedium
Verify before production. This result assumes the cited product scope. Test with the actual press, transfer system, blank lot, environment, and production conditions.
Preparation
- Confirm the mug coating and mug-press compatibility.
- Secure the transfer without gaps.
Removal and cooling
- Paper removal
- Remove the transfer according to the mug supplier’s cooling guidance.
- Cooling
- Use the mug supplier’s approved cooling method; avoid thermal shock.
Scope and caveats
- Mug presses and coatings vary widely.
- This range is not a substitute for the mug manufacturer’s instruction.
Evidence
Sources
- Sawgrass Technologies — Sublimation Heat Press Settings Quick Reference GuideOfficial source · last checked 2026-08-04